Product Description
Are you looking for the most energy efficient form of heating water? Gecko's in.temp is the perfect solution! Air sourced heat pumps will allow you to save up to 75% energy consumption in comparison with electric elements. The icing on the cake is that Gecko’s in.temp also uses an ecofriendly refrigerant.
With in.temp, you can choose one of its six modes of
operation that suits you the best, depending on your climate. Smart modes let you taking full advantage of
your in.temp to optimize your savings.
Gecko's in.temp is completely plug and play. Simply connect it to a Y series control that supports it and you’re good to go!
Automatic detection, smart power management and no additional power circuit required, the in.temp powers
directly from the spa control.
Dimensions: 35-1/2"L x 16-11/16"W x 26"H
California Residents WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Tech Tip
A bypass, consisting of three valves, must be installed to adjust water flow to the in.temp and to isolate the apparatus for maintenance purpose.
For a more stable flow in the heat exchanger, it is recommended to install the in.temp on the
pressure side of the main pump.
The in.temp is intended to be powered by the spa control using the included power cable but it can also be powered by
an external circuit breaker.
If an external circuit breaker is used to power the in.temp, make sure the cord used comply with all local regulation.
To avoid unnecessary shedding of accessories when the in.temp or a different heat pump is not powered by the spa
control, set the heat pump current to zero (0) through your spa user interface.
Looking for the description, tech tips, exploded diagram, available styles, documentation, specifications, kit components, and other information?
Log in now
to access to all this information and more!